13.3inch E Paper Display for RasPi for Jetson for RDK X3 for STM32 960x680 SPI Interface Electronic Ink Screen

Item Type. 13.3inch E Paper Display
Material: Electronic Ink
Driver Board Size: Approx. 65.0 x 30.2mm / 2.6 x 1.2in
Display Size: Approx. 275.52 x 195.16mm / 10.85 x 7.68in
Overall Dimension (Bare Screen): Approx. 286.32 x 212.26 x 1.20mm / 11.27 x 8.36 x 0.05in
Communicate Interface: SPI
PX Pitch: 0.287mm x 0.287mm
Resolution: 960 x 680
Display Colors: Black, White
Gray Levels: 2
Refreshness Time: 5s
Refreshness Power Consumption: 66mW (typ.)
Sleep Current: < 0.01uA (almost 0)

Features

1、APPLICABLE MOTHERBOARDS: 13.3inch e paper screen is based on for RasPi 40 PIN GPIO interface design, reserved SPI control interface, suitable for RasPi series motherboards, for Jetson, for RDK X3, for STM32 and other motherboards.
2、LOW POWER CONSUMPTION: Power consumption is very low, basically only when refreshing, because there is no need for a backlight, the last screen can be kept without power for a long time.
3、960x680 RESOLUTION: Electronic ink screen on board levels shifter chip, compatible with 3.3V and 5V microcontroller interface (module). 960x680 resolution, will be clearer.
4、REFRESHNESS TIME: Refreshness time is experimental test data, the actual refreshness time will have error, subject to the actual effect. Global refreshness process will have a flickering effect, this is a normal sign.
5、REFRESHNESS POWER CONSUMPTION: Power consumption data for the experimental test data, the actual power consumption due to the existence of the driver board and the actual use of different situations, there will be some error, subject to the actual effect.

Package List

1 x 13.3inch E Paper Display