4.3in Optical Time Domain Reflectometer 1550nm Testing Wavelength Automatic OTDR Tester

Rating *

Name

Email *

Review Subject *

Comments *

$422.01

Shipping: 3.99$ per item

Product Overview

Item Type: Mini Optical Time Domain Reflectometer
Material: ABS
Battery: Built In 3.7V 4000mah Polymers Lithium Battery (Reflectometer Shipped With Built-In Battery) 1.5V AAA Battery x 2 (Receiver Shipped Without Battery)
Uses: Used To Evaluate FTTx And Access Net Construction And Maintenance, Identify Fiber Breakpoints, Measure The Length Of Optical Cable, Calculate The Relative Optical Power Loss
Basic Parameters:
Test Wavelength: 1550nm
With Light Test: Not Supported
Fiber Type: G.652 Single Mode Fiber
Dynamic Range: 24dB
Event Blind Area: 2.5m
Attenuation Blind Area: 8m
Measurement Range: 500m, 1km, 2km, 4km, 8km, 16km, 32km, 64km, 100km
Pulse Width: 3ns-20us
Distance Measurement Accuracy: ± (1m Plus Sampling Interval Plus 0.005% x Test Distance)
Linearity: ±0.05dB/DB
Sampling Points: 16k To 128k
Sampling Resolution: 0.05m To 8m
Reflection Accuracy: ±3dB
Wavelength Range: 800nm To 1700nm
Optical Connector: Universal Connector FC SC ST
Measurement Range: -70dBm To +6dBm Or -50dBm To +26dBm
Uncertainty: ±5%
Frequency Identification: CW, 270, 330, 1k, 2kHz
Calibration Wavelength: 850, 980, 1300, 1310, 1490, 1550, 1625, 1650nm
Laser Type: FP LD
Output Wavelength: 1550nm±20nm
Output Power Adjusting: (-2dBm ± To -10dBm) ±2dB
Modulation Frequency: 270, 330, 1k, 2kHz
Stability: CW, ±0.2dB/15min (Tested After 15min Power-On Warm-Up)
Optical Connector: FC Or UPC (Interchangeable SC, ST)
Working Wavelength: 650nm±20nm
Output Power: 10mW
Operating Mode: CW, 1Hz, 2Hz
Optical Connector: Universal Connector FC, SC, ST
Testing Distance: 0 To 300m

Features

1、HIGH PERFORMANCE CHIP: This optical time domain reflectometer is with high performance chip and can do stable running and accurate measuring.
2、4.3INCH CAPACITIVE SCREEN: OTDR tester is with 4.3inch multi touch capacitive screen with new gesturing amplification and screen capturing. 12 in 1 multifunctional.
3、LINE ORDER REMOTE ADAPTER: The OTDR tester is with concealed net cable line order remote adapter and can do net cable pairing, net cable sourcing, wire ranging.
4、AUTO OR PROFESSIONAL OTDR: This tester is versatile and with auto OTDR, professional OTDR event map, light power meter, visible red light, adjusting light source, optical loss test, net cable pairing, net cable sourcing, wire ranging.
5、HIGH ISOLATION BILATERAL: OTDR tester is with high isolation bilateral, filtering technology with light testing, support less than ‑5dBM optical signal with light testing, even with light testing will not be leading to optical device damage, strict protection of their own parts, to deal with more complex testing environment.