Product Overview
Features:
1. Adopt advanced 32-bit special motor control digital signal processing chip and vector close-loop control technology.
2. Step-and-loop close-loop circuit system can improve motor output the moment of force and speed without losing motion synchronization.
3. Adjust the current according to the load to reduce the motor temperature rise.
4. Suitable for various mechanical load conditions (including low rigidity pulleys and pulleys) without adjusting the gain parameters.
5. The motor runs smoothly and the vibration is slight, which improves the dynamic performance of acceleration and deceleration.
6. 0 speed static capability without vibration after positioning is completed.
8. Built-in position and alarm output signals for easy PC monitoring and control.
9. The position tolerance alarm function guarantees safe operation of the processing equipment.
Specification:
Condition: 100% Brand New
Motor Model: 57HSE2N-D25
Material: Carbon Steel + Copper
Power Supply: DC24~50V
Output Current Peaking Value 6.0A (varies according to load)
Logic Input Current: 7~20mA
Pulse Frequency: 0~200kHz
Suitable Motor: 57HSE
Encoder Line: 1000
Insulation Resistance: ≥500MΩ
Cooling Method: Natural Cooling or Use of An External Heat Sink
Working Conditions:
Environment to Avoid Dust, Oil Mist and Corrosive
Temperature: 0~50℃
Humidity: 40-90% RH
Vibration: 5.9 meter / s2Max
Storage Temperature: 0~50℃
Motor the Moment of Force: 2N.m
Rated Current: 4A
Shaft: 8mm
Maximum Speed: 2000rpm
Rated Speed: 1000rpm
Impulse Response Frequency: 200kHz.
Package List:
1 * Drive
1 * Stepper Motor
2 * Connecting Cables
1 * User Manual
1. Adopt advanced 32-bit special motor control digital signal processing chip and vector close-loop control technology.
2. Step-and-loop close-loop circuit system can improve motor output the moment of force and speed without losing motion synchronization.
3. Adjust the current according to the load to reduce the motor temperature rise.
4. Suitable for various mechanical load conditions (including low rigidity pulleys and pulleys) without adjusting the gain parameters.
5. The motor runs smoothly and the vibration is slight, which improves the dynamic performance of acceleration and deceleration.
6. 0 speed static capability without vibration after positioning is completed.
8. Built-in position and alarm output signals for easy PC monitoring and control.
9. The position tolerance alarm function guarantees safe operation of the processing equipment.
Specification:
Condition: 100% Brand New
Motor Model: 57HSE2N-D25
Material: Carbon Steel + Copper
Power Supply: DC24~50V
Output Current Peaking Value 6.0A (varies according to load)
Logic Input Current: 7~20mA
Pulse Frequency: 0~200kHz
Suitable Motor: 57HSE
Encoder Line: 1000
Insulation Resistance: ≥500MΩ
Cooling Method: Natural Cooling or Use of An External Heat Sink
Working Conditions:
Environment to Avoid Dust, Oil Mist and Corrosive
Temperature: 0~50℃
Humidity: 40-90% RH
Vibration: 5.9 meter / s2Max
Storage Temperature: 0~50℃
Motor the Moment of Force: 2N.m
Rated Current: 4A
Shaft: 8mm
Maximum Speed: 2000rpm
Rated Speed: 1000rpm
Impulse Response Frequency: 200kHz.
Package List:
1 * Drive
1 * Stepper Motor
2 * Connecting Cables
1 * User Manual
Features
1、Adopt advanced 32-bit special motor control digital signal processing chip and vector close-loop control technology.
2、Step-and-loop close-loop circuit system can improve motor output the moment of force and speed without losing motion synchronization.
3、Adjust the current according to the load to reduce the motor temperature rise.
4、Suitable for various mechanical load conditions (including low rigidity pulleys and pulleys) without adjusting the gain parameters.
5、The motor runs smoothly and the vibration is slight, which improves the dynamic performance of acceleration and deceleration.
Package Weight and Dimension
| Weight | 4.22 lb |
| Width | 7.02 Inch |
| Height | 6.24 Inch |
| Length | 10.14 Inch |
