Active Equalizer Balancer 17‑21S Lifepo4 Battery Energy Transfer Equalization Module 5A Capacitor

Item Type: Active Equalizer Balancer
Material: PCB
Suitable for ternary lithium, lithium iron phosphate, lithium titanate, Li ion LiFePo4 LTO
Battery Type: NCM, LFP, LTO
Only available for lithium polymer and lithium iron phosphate battery pack versions
LTO: Lithium 2 Ti 3
LPO: Lithium ion
LFP: LiFePo4
Current: 5A
Panel Size: Approx. 145 x 130 x 16mm / 5.71 x 5.12 x 0.63in

Features

1、WORKING PRINCIPLE: The for flycap capacitor transmit the charge transmitter, the balancer board is connected to the battery to start the balancing work, and the original ultra low internal resistance MOS, 2oz copper thick PCB is used
2、HIGH ACCURACY: The balance current is 0‑5A, the more balanced the battery current is, the smaller the current is, reserved for the wiring position of the sleep switch, the working current of the sleep power off mode is less than 0.1mA, and the balance voltage accuracy is within 5mv
3、TECHNICAL PARAMETERS: The quiescent current is about 12mA, and the battery capacity is recommended to be used between 60‑300AH per balancer
4、PROTECTION FUNCTION: The active equalizer balancer with under voltage sleep protection. When voltage less than 3.0V will automatically stop and enter the sleep state, and the standby power consumption is less than 0.1mA
5、APPLICABLE MODEL: Battery active equalization module is only available for lithium polymer and lithium iron phosphate battery pack versions

Package List

1 x Lithium Battery Equalizer

1 x 12Pin Cable

1 x 10Pin Cable