Adapter Card PCIe to SATA ESATA IDE PCB Network Converter Computer Hardware with Driver CD

Item Type: Adapter Card
Material: PCB
Color: Black board
Chip: For JMB363
Transfer Type: PCIe to 2 internal SATA + IDE + 2 external ESATA (external ESATA and internal SATA can only use 2 at the same time, select by jumper, the default is 2 internal SATA interfaces)
SATA Transfer Rate: Up to 3Gb/s
Supports hard drives with a capacity of 137 GB or more (48-bit LBA mode)
1 IDE interface supports up to 2 IDE devices
How to Use:
1. Open the computer case and remove the rear block
2. Insert the adapter into the corresponding PCI-Expres slot
3. After installing the chassis, turn on the device, read the drive disk, install the drive, and then connect to the hard drive for use

Features

1、Comply with PCI-Express 1.0 a standard, support for Ultra ATA 133 hard drive, and downward support for Ultra ATA 100/66/33 standard.
2、The adapter card supports hard drives with a capacity of 137 GB or more (48-bit LBA mode).
3、Support 1 external ESATA interface and 1 internal SATA interface, the transfer rate can be up to 3Gb/s.
4、Support for RAID 0/RAID 1/RAID 0+1 mode, support JBOD, with various storage methods.
5、The operation is simple, insert the adapter into the corresponding PCI-Expres slot, read the drive disk and insert the hard disk to use.

Package List

1 x Adapter Card

1 x Driver CD