Product Overview
Material: ABS
Parameter:
Voltage Range: 300V Test range (v): 0.0-300V, resolution (v): 1V, impedance (Ω) >1M
Current Range: 10A Test range (v): +/-0-9.99A, resolution (A): 0.01A
Display Mode: 0.28in LED, bicolor (red and blue)
Operating Current: <20mA
Supply Voltage: Non Isolated Meter: DC3. 5-30V (wide range) Note: The maximum power supply voltage of the non isolated meter should not exceed 30V, otherwise there is a risk of burning.
Size: Approx. 48x29x21mm/1.9x1.1x0.8in
Mounting Hole: Approx. 45.5x26.5 mm/1.79x1.04in
Measurement Accuracy: 1% (±2)
Measurement Rate: ≥500mS/time
Working Temperature: -10-+50°C
Working Air Pressure: 80~106kPa
Working Humidity: 10-80% (non-condensing)
Sun Exposure: Do not expose directly to the sun
Features
1、Dual Display: Display Voltage and current at the same time; Power supply: DC3.5‑30V; Voltage test range: 0~300V; Current test range: ± 0‑9.99A.
2、Good Consistency: With exquisite SMT process, common ground design, the measurement end and the power supply end ground wire are connected (except for the isolation table).
3、Calibration: Equipped with voltage calibration potentiometer, current calibration potentiometer, if there is an error, you can calibrate it yourself.
4、High Performance: The voltmeter adopts decimal point automatic shift design, which has strong anti interference ability and fast display refresh speed.
5、Practical in Use: Easy to connect, with a wide power supply range of DC3.5‑30V (except for isolation meters), and has power supply with reverse polarity protection.
Package List
1 x Volt Amp Meter
Package Weight and Dimension
| Weight | 0.66 lb |
| Width | 1.95 Inch |
| Height | 1.17 Inch |
| Length | 3.51 Inch |
