DC Gear Motor Micro Low Speed CW CCW Permanent Magnet Bracket Sport Control 24V XD42GA755(20rpm/min )

Item Type: DC Gear Motor
Model: XD-42GA755
Material: Copper
Output Shaft Size: Approx. 8 x 20mm / 0.3 x 0.8in
Insulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20MΩ
Temperature Rise: It is normal to install a gear box or equivalent heat sink and conduct rated operation under normal temperature and humidity by using the resistance method to measure the temperature rise of the coil below 70℃
Insulation Class: Class B(130℃)
Operating Environment Temperature: Motor: -10~+40℃ (no icing)
Use Environment Humidity: 85% or less (no condensation)
CW/CCW: Yes
Speed Adjusted: Yes

Features

1、Using all metal gears, come with small size, large torsion, ultra‑quiet, stable operation
2、The stator and rotor adopt pure copper coils, and the deceleration resistance and conductivity are strengthened, thereby increasing the torsion of the motor
3、This brushless motor will automatically cut off the power when the current reaches 3A, so as to avoid burning out during the use of the motor and increase the service life of the motor
4、The lubricating oil applied to the motor gear is high-temperature grease, which has the characteristics of low friction, noise reduction, and slow temperature rise
5、There are two magnets in the motor body, which have the characteristics of high remanence, high coercivity, high magnetic energy product, high performance, and high torsion
6、Mainly used in micro‑machines in various industries like circulating fans, humidifiers, dehumidifiers, air fresheners, cold and warm fans, soap dispensers, hand dryers, smart door locks, textile machinery, laser processing machinery, engraving machines, printing machinery, automatic packaging machine

Package List

1 x DC Gear Motor

1 x Bracket