Product Overview
Model: XD-25GA370
Material: Copper
Output Shaft Size: Approx. 4 x 12mm / 0.2 x 0.5in
Insulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20MΩ
Temperature Rise: It is normal to install a gear box or equivalent heat sink and conduct rated operation under normal temperature and humidity by using the resistance method to measure the temperature rise of the coil below 70℃
Insulation Class: Class B(130℃)
Operating Environment Temperature: Motor: -10~+40℃ (no icing)
Use Environment Humidity: 85% or less (no condensation)
CW/CCW: Yes
Speed Adjusted: Yes
Features
1、DC gear motor adopt all metal gears, wear‑resistant, quiet, and possess long service life
2、Using pure copper coil stator and rotor, deceleration resistance and conductivity are strengthened, so that the motor torsion is increased
3、With overcurrent protection, this brushless motor will automatically cut off the power when the current reaches 3A
4、The lubricating oil applied to the motor gear is high‑temperature grease, which has low friction, noise reduction, and slow temperature rise
5、Two magnets in the motor body have the characteristics of high remanence, high coercivity, high magnetic energy product, high performance, and high torsion
6、Used in micro‑machines in various industries like circulating fans, humidifiers, dehumidifiers, air fresheners, cold and warm fans, soap dispensers, hand dryers, smart door locks, textile machinery, laser processing machinery, engraving machines, printing machinery, automatic packaging machine
Package List
1 x DC Gear Motor
Package Weight and Dimension
| Weight | 0.66 lb |
| Width | 1.56 Inch |
| Height | 1.56 Inch |
| Length | 3.9 Inch |
