Product Overview
Material: PCB
Rated Current: Rated 5A
Response Speed: K1 and K2 are 20ms, SW1 and SW2 are 50ms
Module Power Consumption: 0.6W(without load motor), static 0.1W
Action Life: More than 150,000 times
Features
1、SELF LOCKING: M8‑P0 self locking standard version, input low level, the signal only needs to be triggered once, the module self locking runs all the time
2、0.3 SECONDS TO STOP: CCW signal is encountered during CW rotation, will stop immediately after 0.3 seconds and enter CCW rotation
3、STOP IMMEDIATELY WHEN ENCOUNTERS LIMIT SIGNAL: The limit signal has priority, and will stop immediately when encounters the limit signal of the CW rotation during CW rotation
4、CW ROTATION CANNOT BE STARTED UNDER LIMIT SIGNAL: When there is a CW rotation limit signal, the CW rotation cannot be started. CCW is the same
5、SHORT CIRCUIT 0V LEVEL TO START: Valid when the positive and negative signal is low, that is, short circuit 0V level(negative power) and start
6、LIMIT SIGNAL NORMALLY OPEN: The limit signal is normally open. For example, when the SW1 switch is closed or connected to a low level, the CW rotation cannot be started
Package List
1 x DC Motor Controller
Package Weight and Dimension
| Weight | 0.66 lb |
| Width | 3.9 Inch |
| Height | 1.17 Inch |
| Length | 5.07 Inch |
