Dual Motor Driver Module High Power H Bridge DC Motor Controller Board with Braking Function

Item Type: Dual Motor Driver Module
Material: PCB
Rated Current: 15A
Peak Current: 30A
Application: For circuit control of various DC motors
Motor Forward Rotation: DIR=1 PWM-PWM
Motor Reverse: DIR-O PWM-PWM
Parking Brake: DIR-X PWM-O (X is any state)
POWER is connected to the positive pole of the power supply, and GND is connected to the negative pole of the power supply. The two motors are connected to MOTOR1 and MOTOR2 respectively.

Features

1、HIGH EFFICIENCY: Effective use of motor power and battery life, can withstand large current overload, the maximum current can reach 30A.
2、BRAKE FUNCTION: The motor driver module has a braking function, which can quickly brake the motor, and the braking is obvious.
3、HALF BRIDGE DRIVE CHIP: Using complete 2 piece half bridge driver chip to minimize switching loss and improve power utilization.
4、BOOTSTRAP CAPACITOR: The bootstrap capacitor is used for the upper tube, and there is enough driving voltage to improve the acceleration curvature of the motor.
5、MOSFET DRIVER CHIP: The MOSFET driver chip has hardware braking function and power feedback function, which can quickly brake the motor.

Package List

1 x Motor Driver Module