Product Overview
Item Type: Faucet
Main Body Material: Imported ABS 777D Material Electroplating Body
Style: Single Handle Single Hole
Heating Range: 30-60℃
Water Inlet Method: Lower Water Inlet
Inlet and Outlet Pipe Specifications: G1/2
Outlet Pipe: 22mm / 0.9in 201 Stainless Steel Bend
Heating Tube: 304 Stainless Steel Heating Tube
Power Cord: Equipped with 1.5 meters long/3x1.5mm² national standard line
Rated Power: 3000W
Rated Frequency: 50HZ
Working Range of Water Pressure: 0.1-0.6Mpa
Waterproof Rating: IPX 4
Anti-Shock Type: Level 1
Weight: Approx. 1360g / 48oz
How to Use:
The water inlet method of this product is water inlet (you cannot install it if you buy it wrong)
1. Requirements for water pressure
Because the product relies on water pressure to start the heating device, the product’s start water pressure is between 0.04Mpa-0.6Mpa, (the actual test output is 20 seconds to fill a 500ML bottle in a bottle, for reference only) because the product relies on water If you start the heating device by pressing, the light is not on for the first time and there is no hot water output. It can be concluded that the water pressure is not enough. If your home is not tap water, it is supplied by water from the water tower, and the water pressure is low. Suggest you buy
2. Regarding water temperature adjustment
The product is a constant power, the temperature is adjusted by the size of the water flow, the handle is opened to the hot water area, the greater the water boiling, the faster the water flow, the lower the temperature, and vice versa, the smaller the water boiling, the slower the water flow, the higher the temperature. According to our actual test, the water flow should not be too large in winter, and the water temperature can reach the water temperature range of 30-60 degrees, which is suitable for daily washing and vegetable washing. If the water temperature is too high and you like to burn your hands and feet, it is not recommended to buy. (The heating of the product is based on the temperature of the water in the local water pipe.)
3. About factory inspection
The faucet should be tested, but if it is tested, the water will dry and burn, so it is tested with water. The manufacturer has many shipments, and there is no time for natural dry, so many goods are wet. It is normal to have water stains in the products received
Installation Steps:
1. Open the packing box and put the hose into the metal tube. Then tighten the pipe nut (if there is no hose, please fix the outlet pipe directly). The above is only for the installation method of the pipe and the host separately.
2. Choose the power cord socket according to your requirements. The socket of the wire rack should be aligned with the socket of the power cord. After connecting the water inlet pipe, please test the machine and adjust the rotating handle to the cold water to confirm whether the product or pipe leaks while flowing.
3. The wire connection must be connected to a fixed ground wire. The diameter of the fixed wire must be ≥ 1.5mm². The wire connection must be connected to a fixed ground wire. The fixed ground wire must be able to carry and install such equipment to ensure safe use. Do not use the wrong neutral wire (N blue), live wire (L brown) and ground wire position (yellow and green)
4. After completing the above steps, rotate the handle to the hot water, and the hot water will flow out. The larger the angle, the more water will flow out. Turn the handle to the middle to stop water flow. Rotate the handle to cold water, the cold water will flow out, and the greater the angle, the more water will flow out.
5. When the machine is installed and tested, it is recommended not to throw away the product packaging, manuals and other accessories, please save them for future reference.
Note:
1. This machine is strictly forbidden to install upwards and downwards, inclined installation, horizontal installation, and it is forbidden to install water in the opposite direction.
2. It is strictly forbidden to rectify and use this machine without permission. Do not install a valve in the direction of the water outlet or connect it to an unspecified faucet and connector.
3. The wire connection must be connected to a fixed ground wire. The fixed ground wire must be able to carry and install such equipment to ensure safe use.
4. The model with installed hose should be used together with the new hose assembly that comes with the equipment, and the old hose assembly cannot be reused.
5. For the first use, you must connect the water first, and then turn on the electricity. The maximum water temperature during use should not exceed 60 ℃.
6. It is required to use this product at 0 ℃. If the water in this product may freeze, please prohibit the product from being energized.
7. Due to the uncertainty of civil wiring, the main consideration is the size of the circuit design load. It is recommended not to use other high-power household appliances at the same time when using this product.
8. The nozzle should be cleaned regularly, if it is not used for a long time, please cut off the power supply.
9. Connect the wires carefully, do not use the wrong neutral and ground wire position. In any case, if the power cord is damaged, it must be replaced by a professional to avoid danger.
10. This product cannot be installed outdoors. Do not spray water on the main body of the product when it is indoors.
11. After using hot water, please turn the handle to cold water, cool the faucet, run cold water for 3 seconds, and then turn it off. This can effectively prevent the surface of the heating tube from scaling and prolong the life of the machine. When you use it next time, you should also avoid burning the high-temperature water in your hands.
12. This product is not recommended to be used with solar water heaters, otherwise it will affect the life of the product.
13. The service life of this product is 5 years.
Main Body Material: Imported ABS 777D Material Electroplating Body
Style: Single Handle Single Hole
Heating Range: 30-60℃
Water Inlet Method: Lower Water Inlet
Inlet and Outlet Pipe Specifications: G1/2
Outlet Pipe: 22mm / 0.9in 201 Stainless Steel Bend
Heating Tube: 304 Stainless Steel Heating Tube
Power Cord: Equipped with 1.5 meters long/3x1.5mm² national standard line
Rated Power: 3000W
Rated Frequency: 50HZ
Working Range of Water Pressure: 0.1-0.6Mpa
Waterproof Rating: IPX 4
Anti-Shock Type: Level 1
Weight: Approx. 1360g / 48oz
How to Use:
The water inlet method of this product is water inlet (you cannot install it if you buy it wrong)
1. Requirements for water pressure
Because the product relies on water pressure to start the heating device, the product’s start water pressure is between 0.04Mpa-0.6Mpa, (the actual test output is 20 seconds to fill a 500ML bottle in a bottle, for reference only) because the product relies on water If you start the heating device by pressing, the light is not on for the first time and there is no hot water output. It can be concluded that the water pressure is not enough. If your home is not tap water, it is supplied by water from the water tower, and the water pressure is low. Suggest you buy
2. Regarding water temperature adjustment
The product is a constant power, the temperature is adjusted by the size of the water flow, the handle is opened to the hot water area, the greater the water boiling, the faster the water flow, the lower the temperature, and vice versa, the smaller the water boiling, the slower the water flow, the higher the temperature. According to our actual test, the water flow should not be too large in winter, and the water temperature can reach the water temperature range of 30-60 degrees, which is suitable for daily washing and vegetable washing. If the water temperature is too high and you like to burn your hands and feet, it is not recommended to buy. (The heating of the product is based on the temperature of the water in the local water pipe.)
3. About factory inspection
The faucet should be tested, but if it is tested, the water will dry and burn, so it is tested with water. The manufacturer has many shipments, and there is no time for natural dry, so many goods are wet. It is normal to have water stains in the products received
Installation Steps:
1. Open the packing box and put the hose into the metal tube. Then tighten the pipe nut (if there is no hose, please fix the outlet pipe directly). The above is only for the installation method of the pipe and the host separately.
2. Choose the power cord socket according to your requirements. The socket of the wire rack should be aligned with the socket of the power cord. After connecting the water inlet pipe, please test the machine and adjust the rotating handle to the cold water to confirm whether the product or pipe leaks while flowing.
3. The wire connection must be connected to a fixed ground wire. The diameter of the fixed wire must be ≥ 1.5mm². The wire connection must be connected to a fixed ground wire. The fixed ground wire must be able to carry and install such equipment to ensure safe use. Do not use the wrong neutral wire (N blue), live wire (L brown) and ground wire position (yellow and green)
4. After completing the above steps, rotate the handle to the hot water, and the hot water will flow out. The larger the angle, the more water will flow out. Turn the handle to the middle to stop water flow. Rotate the handle to cold water, the cold water will flow out, and the greater the angle, the more water will flow out.
5. When the machine is installed and tested, it is recommended not to throw away the product packaging, manuals and other accessories, please save them for future reference.
Note:
1. This machine is strictly forbidden to install upwards and downwards, inclined installation, horizontal installation, and it is forbidden to install water in the opposite direction.
2. It is strictly forbidden to rectify and use this machine without permission. Do not install a valve in the direction of the water outlet or connect it to an unspecified faucet and connector.
3. The wire connection must be connected to a fixed ground wire. The fixed ground wire must be able to carry and install such equipment to ensure safe use.
4. The model with installed hose should be used together with the new hose assembly that comes with the equipment, and the old hose assembly cannot be reused.
5. For the first use, you must connect the water first, and then turn on the electricity. The maximum water temperature during use should not exceed 60 ℃.
6. It is required to use this product at 0 ℃. If the water in this product may freeze, please prohibit the product from being energized.
7. Due to the uncertainty of civil wiring, the main consideration is the size of the circuit design load. It is recommended not to use other high-power household appliances at the same time when using this product.
8. The nozzle should be cleaned regularly, if it is not used for a long time, please cut off the power supply.
9. Connect the wires carefully, do not use the wrong neutral and ground wire position. In any case, if the power cord is damaged, it must be replaced by a professional to avoid danger.
10. This product cannot be installed outdoors. Do not spray water on the main body of the product when it is indoors.
11. After using hot water, please turn the handle to cold water, cool the faucet, run cold water for 3 seconds, and then turn it off. This can effectively prevent the surface of the heating tube from scaling and prolong the life of the machine. When you use it next time, you should also avoid burning the high-temperature water in your hands.
12. This product is not recommended to be used with solar water heaters, otherwise it will affect the life of the product.
13. The service life of this product is 5 years.
Features
1、With LED temperature display, it can dynamically display the current water temperature.
2、Water and electricity double isolation, built‑in waterproof electric wall and leakage protection.
3、With safety relief plug to prevent explosion caused by excessive internal pressure of the machine.
4、Built‑in thermal protection, triple protection to prevent the heating body from drying out.
5、Easy to use, instant heating, water temperature can be adjusted randomly to meet the needs of use.
6、Use ceramic cartridge structure, support low-voltage start, suitable for home kitchen.
7、With induction and flow sensor to prevent machine from automatically starting due to freezing.
8、Easy to install and disassemble, you can choose surface and concealed installation.
Package List
1 x Faucet
1 x Manual
Package Weight and Dimension
| Weight | 2.99 lb |
| Width | 10.92 Inch |
| Height | 4.29 Inch |
| Length | 18.33 Inch |
