Filament Printing Materials Plastic PLA Filaments for 3D Printer Extruder Pen Accessories 1.75mmWhite

Item Type: Filament Printing Materials
Material: Plastic
Physical Properties: Standard Value
Density: 1.24g/cm³
Melts Flow Rate (190℃, 8.7Kg): 1.8g/10min
Water Absorption (Saturated, 23℃): 0.30%
Mechanical Properties: Standard Value
Tensile Strength: 48.5MPa
Flexural Strength: 82.7MPa
Notched Impact Strength (IZOD, 23℃): 16Kgj/m
Breaking Elongation: ≥2.5%
Heat Distortion Temperature: 60℃
Accuracy: Standard Value
Diameter (1.75mm): Approx. 1.75±0.03mm / 0.06in
Roundness Deviation: ≤0.03mm 

Features

1、High Flexibility: Filament printing material has high flexibility and resilience. With PLA, can print hard and soft objects
2、High Purity: High purity, original materials, non doped waste, recycled materials. No plugging or insufficient squeezing
3、High Accuracy: High accuracy, and the wire diameter tolerance is stable at ±0.03mm, which is more beneficial to the printing effect
4、Good Printing Effect: Good printing effect, non edge warping, non air bubbles, good printing effect, glazed, delicate and accurate colour
5、Good Tensile Strength: Good tensile strength, ductility, fluidity, low shrinkage, high toughness, low weight, environmental protection and healthier

Package List

1 x Filament Printing Materials