Product Overview
Features
1、Convert the 0-500 Hz frequency pulse signal into an analog voltage signal of 0-10V. Can be used for interface conversion between PLC and inverter. Or the motion control card and the inverter and other interfaces match the control occasion.
2、The input pulse level of 5V 12V 24V can be directly input, without string resistance. However, the input signal frequency should be maintained for more than 0.5 seconds.The output current is 5mA.
3、The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
4、The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC,at least 15VDC power supply is required. When the 24V level is used, th
5、The signal input end is isolated by diaphragm. Guaranteed anti-interference ability.
Package Weight and Dimension
| Weight | 0.66 lb |
| Width | 3.12 Inch |
| Height | 1.17 Inch |
| Length | 5.07 Inch |
