FY117 500V Digital Multimeter LCD Display Pen Type NCV AC DC Voltage Meter Tool for Electrician

Item Type: Multimeter
Material: ABS
Model: FY117
Power Supply: AAA 2 x 1.5V (Battery Not Included)
Purpose: Electricity Numerical Measurement
Measuring Range: Automatic
Overload Protection: Full Range
Working Height: Up to 2000m
Display: LCD Dual Display
Maximum Display Value: 2000 Digits
Polarity Indication: Self Indicating, Indicating Negative Polarity
Over-Range Display: "OL' or OL"
Sampling Time: Approximately 0.4 seconds for the digital display of the meter
Unit Display: Function and battery unit display
Automatic Shutdown Time: 5 minutes
Temperature Coefficient: Less than 0.1 x accuracy/℃
Working Temperature and Humidity: 0-40℃/32-104℉, 45%-70% RH
Storage Temperature and Humidity: -10-60℃/-4 -140%℉, 45%-70% RH
Main Function
Range
Resolution
Accuracy
DC Voltage
500V
1V
±(0.8%+3counts)
AC Voltage
500V
1V
±(1.2%+5counts)
Resistance
10MΩ
0.1MΩ
±(1.2% +3counts)
Frequency
1000Hz
1Hz
±(2.0%+3counts)
Voltage DC or AC, frequency, resistance measurement continuity:
1. Insert the red test lead into the "INPUT" terminal and the black test lead into the "COM" terminal.
3. When the resistance is less than 30Ω, the buzzer will sound.
5. Read the measurement result from the display.
1. Press the power button.
3. Place the sensor head of the tester close to the wire and insert the probe into the jack. The tester detects that one of the strong induction signals is the live wire, and the weak or no induction signal of the induction signal is the neutral wire.
Switch mode:
Green button: Long press to switch modes, short press to turn on the flashlight.

Features

1、COMPACT AND PORTABLE Pen type digital multimeter is made of high quality ABS material, which is durable and compact, and is convenient to carry and measure.
2、LCD DISPLAY With LCD dual display screen, it supports synchronous display of voltage + frequency, and the value is displayed clearly and intuitively.
3、INTELLIGENT ANTI BURNING With intelligent anti burn function, no gear shifting, automatic identification and measurement after power‑on, without fear of mis operation.
4、BREAKPOINT JUDGMENT Check the breakpoint position along the line when the single strand line is live, and it will not damage the line and easily find the breakpoint.
5、NCV MEASURING Non contact measurement, partition wall inspection, safety inspection, insulation operation, suitable for professional electricians.

Package List

1 x Multimeter (Battery Not Included)

2 x Test Lead

1 x Screwdriver

1 x Manual