Product Overview
Condition:100% Brand New
Item Type: Bike Brake Lamp
Material: ABS + Stainless Steel Spring
Size: Approx. 3.5 x 2.8cm / 1.4 x 1.1in
Power Supply: 1 x CR1025 button battery
Available Range: Wire clamp, wire pull disc brake, V type C type
Installation Instructions:
Unlock Sign: Turn the battery cover to the unlocking direction to open the battery cover.
Locking Sign: Screw the battery cover to the locking direction to tighten the battery cover.
Battery Cover Slot: Use a one yuan coin to insert into the groove of the battery cover to unlock the universal, then you can open the battery cover and battery cover; screw the opened battery cover back, you need to pay attention to aligning the two grooves in the lamp. screw.
Inner Hex Screw: Use the supplied hexagonal socket tool to loosen the screws and insert the brake cable and then screw the screws on the brake cable.
Spring: When replacing the battery, do not press the button randomly, otherwise the spring will shift, and the spring must be stuck on a post under the yellow lampshade to work normally.
Brake Cable Slot: Snap the brake cable into the alignment position and tighten the screws to fix the installation.
Item Type: Bike Brake Lamp
Material: ABS + Stainless Steel Spring
Size: Approx. 3.5 x 2.8cm / 1.4 x 1.1in
Power Supply: 1 x CR1025 button battery
Available Range: Wire clamp, wire pull disc brake, V type C type
Installation Instructions:
Unlock Sign: Turn the battery cover to the unlocking direction to open the battery cover.
Locking Sign: Screw the battery cover to the locking direction to tighten the battery cover.
Battery Cover Slot: Use a one yuan coin to insert into the groove of the battery cover to unlock the universal, then you can open the battery cover and battery cover; screw the opened battery cover back, you need to pay attention to aligning the two grooves in the lamp. screw.
Inner Hex Screw: Use the supplied hexagonal socket tool to loosen the screws and insert the brake cable and then screw the screws on the brake cable.
Spring: When replacing the battery, do not press the button randomly, otherwise the spring will shift, and the spring must be stuck on a post under the yellow lampshade to work normally.
Brake Cable Slot: Snap the brake cable into the alignment position and tighten the screws to fix the installation.
Features
1、Stainless steel spring + ABS engineering plastic V‑switch, use time up to 50 hours, long service life.
2、Easy to install and use, when you brake, it will automatically light up as a warning.
3、For cyclists, it is very good to use it to maintain the safety of night riding.
4、It has high‑efficiency waterproof performance and can be used in rainy days.
5、Wide range of application, can be used for wire‑controlled calipers, wire‑pull disc brakes, V‑type C‑type.
Package List
1 x Bike Brake Lamp
1 x Internal Hexagonal Wrench
Package Weight and Dimension
| Weight | 0.66 lb |
| Width | 2.73 Inch |
| Height | 0.78 Inch |
| Length | 3.9 Inch |
