Product Overview
Material: Aluminium alloy
Model: LM6048
Charging Current: 30A 60A
System Voltage: 12V 24V 36V 48V Auto
No Load Loss: ≤0.4W
Maximum Solar Input Voltage: 180V (25°C) 150V (-25°C)
Battery Voltage: 9 to 70V
Maximum Power Point Voltage Range: Battery Voltage +2V to 120V
Rated Charge Current: 30A 60A
Rated Load Current: 20A
Maximum PV System Input Power: 360W 12V 720W 12V, 720W 24V 1440W 24V, 1080W 36V 2160W 36V, 1440W 48V 2880W 48V
Conversion Efficiency: ≤98%
MPPT Tracking Efficiency: >99%
Temperature Compensation Factor: -2mv/°C 2V (default)
Operating temperature: -10°C to +65°C
Waterproof rating: IP21
Altitude: ≤3000m
Size: Approx. 214 x 115 x 50mm / 8.43 x 4.53 x 1.97in
Features
1、High Performance DSP Controller: This 60A solar charge controller is intelligent with a maximum efficiency of ≥ 98.1% and a PV utilisation rate of ≥ 99%. Built in high performance DSP controller for automatic battery voltage detection.
2、Multiple Battery Adaptation: The solar charge controller is suitable for batteries with settable lithium, lithium battery, lithium (NiCoMn) O2, vented, liquid rich, sealed, gel, nickel cadmium batteries. User programmable absorption voltage, floating voltage, low voltage disconnect, load timer, with real time energy logging. Solar and battery connectors have 2 connectors per pos and neg, 9AWG copper wire.
3、Full System Protection: The solar charge controller has a backlit LCD Dispaly PV voltage, output power, battery voltage, charge current, operating mode and temperature. the LCD display not only helps the user to view the operating data and status of the entire system, but also to quickly identify system faults and modify parameters.
4、Intelligent Heat Dissipation: The solar charge controller has an intelligent fan that turns on at > 45°C and off at < 40°C, with multiple holes for heat dissipation. The fan uses BEARING technology for an extended service life of up to 5000 hours under normal use. Suitable for caravans, commercial vehicles, boats, yachts and solar systems.
5、Over Temperature Protection: The solar charge controller uses a built in over temperature protection mechanism. When the temperature exceeds the set value, the charging current will drop in linear proportion to the temperature and stop discharging, thus inhibiting the temperature rise of the controller and effectively preventing the controller from being damaged by overheating.
Package List
1 x Solar Charge Controller
4 x Screw
4 x Holder
1 x Instruction Manual
Package Weight and Dimension
| Weight | 2.77 lb |
| Width | 5.46 Inch |
| Height | 3.12 Inch |
| Length | 10.53 Inch |
