Optical Fiber Power Meter ‑50 To +26dbm Rechargeable Fiber Optic Cable Tester with Backlit

Item Type: Optical Fiber Power Meter
Material: ABS
Wavelength Range (nm): 800-1700
Probe Type: InGaAs
Measurement Range (dbm): -50~+26
Uncertainty: ±5%
Standard Wavelength (nm): 850 980 1270 1300 1310 1490 1550 1577 1625
Display Resolution: Linear display: 0.1%; Logarithmic display: 0.01dBm
Red Light Working Wavelength (nm): 650
Frequency Identification (Hz): 0, 270, 1000, 2000
Number of Offline Saved Data (PCS): 20000
Working Temperature (℃): -10~+60
Storage Temperature (℃): -25~+70
Automatic Shutdown Time (min): 10
Battery Continuous Working Time (h): ≥48
Battery Type: 3.7V rechargeable lithium battery 600mAh x 1 (built in)

Features

1、[Power Saving Design] Default smart mode when turned on, with no operation for 3 minutes to automatically turn off the backlit. In off mode, press the LED key to switch to smart mode.
2、[Wavelength Memory] Added memory function, our optical fiber power meter can remember the test wavelength set before shutdown after shutdown.
3、[Recognizable Frequency] Accurately identify the fiber optic transmission frequency, which can be used to determine the lighting mode and whether it continuously emits light during engineering construction.
4、[Intelligent Standby] The automatic shutdown function is enabled by default when turning on, this fiber optic power meter will automatically shut down after 10 minutes without any operation.
5、[Unit Switching] Press the UNIT key to select dBm, dB, and uW units in sequence. The test data will be displayed with the corresponding results.

Package List

1 x Optical Fiber Power Meter

1 x Instructions