Product Overview
Condition: 100% Brand New
Item Type: Gaps Strip
Material: PVC + Acrylic
Width: Approx. 38mm / 1.5in
Length: Approx. 3.2m / 10.5ft
Weight: Approx. 222g / 7.8oz
How to Use Adhesion Promoter:
1. Clean the place to be pasted, ensuring that the surface is free of dust, water and oil.
2. Tear off the packaging bag, take out the wipe paper, wipe the surface to be stuck, and wait a few seconds.
3. Then stick the tape and press firmly.
Product Installation Instructions:
1. Clean the parts to be sealed firstly and keep them dry.
2. Before use, firstly measure the length and size of the required sealing parts accurately.
3. Take out the product, measure the same length of the waterproof strip and the sealing part again and cut it off.
4. Firstly peel off the 5CM length of the adhesive tape on the back of the product and fold it to 90°, and then fix the waterproof strip to the surface part to be pasted; continue to peel the adhesive tape until all the installation is completed.
5. When the product is pasted at a 90° turn, cut each side of the butt joint into a 45° interface.
6. The temperature range of the installation room is preferably around 25℃, if the temperature is too low, you can use a hair dryer to heat the adhesive and paste it.
7. After the product is pasted, it will be pressed firmly to make it stick more firmly.
8. After the product is pasted, it should not be mixed with water within 24 hours to keep it dry.
Item Type: Gaps Strip
Material: PVC + Acrylic
Width: Approx. 38mm / 1.5in
Length: Approx. 3.2m / 10.5ft
Weight: Approx. 222g / 7.8oz
How to Use Adhesion Promoter:
1. Clean the place to be pasted, ensuring that the surface is free of dust, water and oil.
2. Tear off the packaging bag, take out the wipe paper, wipe the surface to be stuck, and wait a few seconds.
3. Then stick the tape and press firmly.
Product Installation Instructions:
1. Clean the parts to be sealed firstly and keep them dry.
2. Before use, firstly measure the length and size of the required sealing parts accurately.
3. Take out the product, measure the same length of the waterproof strip and the sealing part again and cut it off.
4. Firstly peel off the 5CM length of the adhesive tape on the back of the product and fold it to 90°, and then fix the waterproof strip to the surface part to be pasted; continue to peel the adhesive tape until all the installation is completed.
5. When the product is pasted at a 90° turn, cut each side of the butt joint into a 45° interface.
6. The temperature range of the installation room is preferably around 25℃, if the temperature is too low, you can use a hair dryer to heat the adhesive and paste it.
7. After the product is pasted, it will be pressed firmly to make it stick more firmly.
8. After the product is pasted, it should not be mixed with water within 24 hours to keep it dry.
Features
1、The surface of the sealing strip is smoothly and beautiful, with center crease line and 90° bend for tightly sealing the gaps between wall.
2、Beautiful and durable, providing a long-lasting sealing, with excellent durability, keeping the kitchen and bathroom neat.
3、Wide range of applications, such as sink, kitchen gas stove, bathroom sink, bottom corner of bathtub, bottom edges of wall and wall gaps.
4、The installation is simple and easy for cleaning, before installation, please clean and dry it, can be cut according to actual needs.
5、Self-adhesive, with acrylic adhesive, strong adhesion, not easy to fall, waterproof, anti-dirt, anti mildew and moisture proof.
Package List
1 x Gaps Strip
1 x Adhesion Promoter
Package Weight and Dimension
| Weight | 0.66 lb |
| Width | 3.51 Inch |
| Height | 1.56 Inch |
| Length | 3.51 Inch |
