Product Overview
Item Type: Frequency Converter
Material: ABS
Storage Temperature: - 25 ℃ to +55 ℃
Input Voltage: Single phase 220-240V AC
Output Voltage: Three phase 0-240V AC
Output Current: 3.8A
Braking Resistance:
Braking Resistance Power: 100W
Braking Resistance: 200 Ω
Instruction:
1. Before wiring, please confirm whether the input power supply is powered off.
2. The wiring operating shall be carried out by professional electrical engineering personnel.
3. The grounding terminal must be grounded.
4. After the emergency stop circuit wiring is completed, be sure to check whether the action is effective.
5. The output line of the frequency converter must not be connected with the housing, and the output line must not be short circuited.
6. Please confirm whether the voltage of AC main circuit power supply is consistent with the rated voltage of frequency converter.
7. Do not carry out voltage withstand test on the frequency converter.
8. Please connect the braking resistor according to the wiring diagram.
9. Do not connect the power cord to the output U, V, W terminals.
10. Do not connect the contactor to the output circuit.
11. Be sure to install the protective cover before powering on. When removing the cover, be sure to disconnect the power supply.
12. Select the frequency converter with reset and retry function, and keep away from mechanical equipment. Because the alarm will suddenly restart when it stops.
13. The alarm can be reset only after confirming that the operating signal is cut off. When the alarm is reset under the operating signal state, the converter may start suddenly.
14. Do not touch the terminals of the converter. There is high voltage on the terminals, which is very dangerous.
15. Do not change wiring and terminal disassembly during power on.
16. Cut off the power supply of the main circuit before inspection and maintenance.
17. Do not modify the frequency converter without authorization.
Material: ABS
Storage Temperature: - 25 ℃ to +55 ℃
Input Voltage: Single phase 220-240V AC
Output Voltage: Three phase 0-240V AC
Output Current: 3.8A
Braking Resistance:
Braking Resistance Power: 100W
Braking Resistance: 200 Ω
Instruction:
1. Before wiring, please confirm whether the input power supply is powered off.
2. The wiring operating shall be carried out by professional electrical engineering personnel.
3. The grounding terminal must be grounded.
4. After the emergency stop circuit wiring is completed, be sure to check whether the action is effective.
5. The output line of the frequency converter must not be connected with the housing, and the output line must not be short circuited.
6. Please confirm whether the voltage of AC main circuit power supply is consistent with the rated voltage of frequency converter.
7. Do not carry out voltage withstand test on the frequency converter.
8. Please connect the braking resistor according to the wiring diagram.
9. Do not connect the power cord to the output U, V, W terminals.
10. Do not connect the contactor to the output circuit.
11. Be sure to install the protective cover before powering on. When removing the cover, be sure to disconnect the power supply.
12. Select the frequency converter with reset and retry function, and keep away from mechanical equipment. Because the alarm will suddenly restart when it stops.
13. The alarm can be reset only after confirming that the operating signal is cut off. When the alarm is reset under the operating signal state, the converter may start suddenly.
14. Do not touch the terminals of the converter. There is high voltage on the terminals, which is very dangerous.
15. Do not change wiring and terminal disassembly during power on.
16. Cut off the power supply of the main circuit before inspection and maintenance.
17. Do not modify the frequency converter without authorization.
Features
1、FULL CHIP DESIGN: All internal components adopt chip design, which greatly increases the stability of the machine.
2、ABS MATERIAL: Made of premium ABS material, the inverter is flame retardant, impact resistant, heat resistant.
3、DIGITAL DISPLAY: The inverter features a digital display and humanized keyboard that is convenient to manipulate, simple and clear.
4、FAST HEAT DISSIPATION: The inverter is equipped with a small fan, also with a large heat sink, possesses premium heat dissipation, ensures long operating time.
5、RS485: With RS485 communication and built in brake unit, the inverter can be externally connected with brake resistor for emergency braking.
Package List
1 x Frequency Converter
1 x Manual
Package Weight and Dimension
| Weight | 2.57 lb |
| Width | 6.24 Inch |
| Height | 4.68 Inch |
| Length | 8.19 Inch |
