Vector Network Analyzer Iron Housing 2.8in LCD Touch Screen High Accuracy Stable Antenna Analyzer

Item Type: Vector Network Analyzer
Material: PCB, iron
Battery: 1 x 18650 lithium battery 1950mAh (built in)
Purpose: Network Analysis
Measurement Frequency Range: 50KHz-3GHz
System Dynamic Range (Calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Floor (Calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 points per second
Display: 2.8in, 320 x 240
Maximum Scan Points (On Device): 201
Maximum Scan Point (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB typical
Port 2 Return Loss (3GHz): 13dB minimum

Features

1、2.8in Touch Screen: The analyzer's 2.8in TFT LCD touch screen display allows you to see the data more clearly and analyze the data accurately.
2、Iron Shell: The analyzer's iron housing has a high hardness and long service life, and does not require frequent replacement.
3、Stable Performance: The analyzer's high stability, high sensitivity, and high accuracy feature greatly improve performance and usability.
4、Wide Measurement Range: The measurement frequency range of the analyzer is 50KHz to 3GHz, which can be applied to many fields.
5、Multiple Application: You can use the analyzer to test the standing wave impedance of the antenna, you can also debug the insertion loss of the duplexer, the filter, the isolation, the standing wave, and you can also test the attenuation, shortening factor, and phase of the cable.

Package List

1 x Host

1 x USB Cable

2 x SMA External Thread to External Thread SS405 RF Cable

1 x SMA Simple Calibration Setting Open Connector

1 x SMA Simple Calibration Device Short Connector

1 x SMA Simple Calibration Set Load Connector

1 x SMA Female to Female Fittings

1 x Storage Bag

1 x Sling

1 x Instruction