Product Overview
Item Type: Wall Pipe Blockage Detector
Material: ABS
Purpose: Battery tester
Battery Properties: Built-in 18650 lithium battery, 3.7V, 2000mAh
Pipeline blocking tester, iron pipe, PVC pipe can be measured
Usage Method:
1. Put the signal wire and the transmitting wire end into the pipeline until the signal wire can't forward, then the position of the probe is the blocking position.
2. Turn on the transmitter power switch, the green indicator light is on.
3. Turn on the power switch of the receiver, and hold the signal receiver to detect along the approximate direction of the buried line pipe. If it is close to the inside of the pipeline, the receiver horn of the probe will make a "buzzing" sound, and the loudest part is the blockage point. Make a mark and pull out the signal line, the ground can be dealt with by cutting through the ground.
4. After continuous use for a period of time, the green light of the product starts to flash, indicating that the remaining battery can be used for about half an hour, please pay attention to timely charging.(hands turn the spool to take up and pay off)
Weight: 1904 g / 67.2 oz(approx.)
Line Length: Approx. 20meter / 65.6ft
Size: Approx. 378 x 300mm / 14.9 x 11.8in
380 x 75mm / 15 x 3in
Maximum Detection Depth: 30cm
Material: ABS
Purpose: Battery tester
Battery Properties: Built-in 18650 lithium battery, 3.7V, 2000mAh
Pipeline blocking tester, iron pipe, PVC pipe can be measured
Usage Method:
1. Put the signal wire and the transmitting wire end into the pipeline until the signal wire can't forward, then the position of the probe is the blocking position.
2. Turn on the transmitter power switch, the green indicator light is on.
3. Turn on the power switch of the receiver, and hold the signal receiver to detect along the approximate direction of the buried line pipe. If it is close to the inside of the pipeline, the receiver horn of the probe will make a "buzzing" sound, and the loudest part is the blockage point. Make a mark and pull out the signal line, the ground can be dealt with by cutting through the ground.
4. After continuous use for a period of time, the green light of the product starts to flash, indicating that the remaining battery can be used for about half an hour, please pay attention to timely charging.(hands turn the spool to take up and pay off)
Weight: 1904 g / 67.2 oz(approx.)
Line Length: Approx. 20meter / 65.6ft
Size: Approx. 378 x 300mm / 14.9 x 11.8in
380 x 75mm / 15 x 3in
Maximum Detection Depth: 30cm
Features
1、The product is waterproof probe, can handle all kinds of environments
2、Support sensitivity adjustment, two steps make positioning more accurate
3、Made of premium ABS material, with impact resistant, and scratch resistant
4、Pipeline blocking tester can be used to detect steel, iron, and PVC pipes
5、Equipped with 4 spare probes, which can be replaced at any time, improving work efficiency
Package List
1 x Wall Pipe Blockage Detector
1 x Handheld Detector
4 x Spare Probe(including 4 spare parts)
1 x USB Charging Cable
Package Weight and Dimension
| Weight | 4.27 lb |
| Width | 14.04 Inch |
| Height | 3.51 Inch |
| Length | 15.99 Inch |
