WallMounted Exhaust Fan 7Blades Ventilation Fan with Check Valve for Kitchen Bathroom 20 cm

Item Type: Exhaust Fan
Material: ABS
Weight: Approx. 700g~739g/24.7oz~26.1oz
Frequency: 50Hz
Waterproof Rating: IPX2
Suggested Installation Method: Wall-Mounted installation
A: Glass glue installation method
1. Make a hole in the wall
2. Insert the machine into the hole, fix it with glass glue, and the installation is complete
B: Screw installation method
1. Loosen the panel screws and take it apart
2. Inside the anti-corrosion installation hole of the base, and marking the installation position screw
3. Drill a screw hole in the marked place and insert a plastic rubber plug
4. Put the base into the mounting hole and lock the screws
5. Cover the panel and the installation is complete

Features

1、High‑quality bearings and pure copper coils have the characteristics of low noise, long life and high efficiency.
2、High‑quality motor, strong performance, pure copper coil, slow heating, fast speed, and more power saving.
3、The supercharged one-piece 7-blades design adopts the guide ring wind ring, combined with fluid dynamics, the air volume is larger and the air exchange efficiency is faster.
4、IPX2 waterproof rating, the host can run stably in humid and harsh environments, suitable for a variety of scenarios, such as kitchens, bathrooms, etc.
5、With a check valve design, it can effectively block dust, cotton wool from flying insects, rain, etc., and prevent air from flowing back when exhausting.

Package List

1 x Exhaust Fan

1 x Instruction