Waterproof 3670 2850KV Brushless Motor 120A ESC Heat Sink Set for 1/8 1/10 RC Car

Condition: 100% Brand New
Item Type: RC Car Motor & ESC
Material: Plastic + Metal + Electronic Components
Color: Red+Black
3670 motor:
Kv (rpm/volt): 2850kv
Wattage: 1600
Maximum Speed: 50000
Maximum Ampere: 86A
Number of Rotor Poles: 4
Diameter: Approx. 36mm / 1.4in
Length: Approx. 69mm / 2.7in
Shaft: Approx. 5mm / 0.2in
Shaft Length: Approx. 17mm / 0.7in
Connector: Approx. 4mm / 0.2in
120A ESC:
Continuous Current: 120A
Maximum Current: 600A
Motor Type: Sensorless and brushless motor
For 4S Lipo or 12 batteries NIMH
1. On the road: 40xx or smaller motors with KV <3000
2. Off-Road Vehicle/Monster: Motor with a size of 40xx or smaller when KV <2500
For 6S Lipo or 18 battery NIMH
1. On the road: 40xx or smaller motors with KV <2500
2. Off-Road vehicle/monster: 40xx or smaller motor with KV <2000
Resistance: 0.00035ohm
Battery: 3-6 cells Lipo / 9-18 cells NIMH
Bec Output: 6.1v/3A (switch mode)
Product Size: Approx. 60 x 45 x 45mm / 2.4 x 1.8 x 1.8in
Compatible: Suitable for 1/10 1/8 RC car.
Instructions for Use:
1. Connect the BEC cable to the receiver.
2. Use ESC to connect the motor cable.
3. Turn on the transmitter.
4. Connect the battery pack to the ESC, and then turn on the ESC.
5. After the connection between the motor and the battery is completed, the motor emits a "beep beep-beep beep beep".
6. When the throttle stick is in the neutral position, the electric motor will beep again.
7. ESC is feasible.
Troubleshooting:
1. If the motor fails to work and no sound is emitted after power-on, please check the connection between the battery pack and the motor.
5. If the car suddenly stops under working conditions, please check the connection of the motor and roadblocks.
6. If the car is driving in the opposite direction (transmitter can be used), please swap the two wires between the ESC and the motor.

Features

1、It adopts a 4‑pole 12‑slot high‑torsion motor design to achieve maximum power conversion.
2、CNC machined steel billet, 6061‑T6 aluminum heat sink, secondary oxidation treatment, high‑end and fine appearance.
3、High‑speed ABEC5 ultra‑durable sealed bearings, low friction, low noise, high accuracy, and long‑lasting use.
4、4.0mm gold‑plated connector, 5.0mm output shaft, suitable for 1/10 or 1/8 brushless car. Using M3 screws, multielement installation styles.
5、High‑balances explosion‑proof rotor, high smoothness, high accuracy and high speed, dynamic balances control within 10mg, removable and replaceable.
6、Ultra‑thin silicon steel sheet, excellent performance, high magnetic permeability, high silicon content, good insulation and heat resistance.
7、The motor adopts precise waterproof design, maximum power conversion, high‑purity copper coil, maximum efficiency, temperature resistance 180‑200℃.
8、Multiple protection functions, battery low‑voltage cut‑off protection, overheating signal loss protection, motor locked‑rotor protection.
9、Powerful current resistance, excellent heat dissipation, easy to program and compatible with pocket programming cards.

Package List

1 x 3670 2850KV Brushless Motor

1 x 120A Waterproof ESC

1 x Heat Sink

2 x Manual