Product Overview
Condition: 100% Brand New
Item Type: Solar Panel
Color: As picture shown
Solar Panel:
ISC: 3,33
Voc: 20V
Technical Analysis Vpmax: 18 V
Power: 400W
Ipmax: 2.77 A
Output: 5 V / 18 V
Size: Approx. 660 x 280 x 2.5mm/26 x 11 x 0.1in
Waterproof Rate: IP65
Conversion Rate: 19.6-20%
Material: Monocrystalline Silicon Battery
Application: Suitable for Cycling, Climbing, Hiking, Camping, Travel, etc.
Controller:
Model: PWM
Step-down Charging: 28.8 V
Floating Charge: 27.4 V
USB Output: 5 V / 3A
Autoconsumo: <10mA
Discharge Stop: 21.4 V
Maximum Solar Input: <50 V
Current: 10A / 20A / 30A / 40A
Rated Working Current: ≤20A
Uninstall and Reconnect: 25.2 V
Working Temperature: -35 ℃ -60 ℃
Safety Instructions:
2. The battery cable should be as short as possible to minimize losses.
3. The regulator is only applicable to lead-acid batteries: open circuit, AGM, GEL (not applicable to NiMH, Li-ion or other batteries).
4. The charging controller is only suitable for adjusting solar cell modules. Never connect other load sources to the charge controller.
System Connection:
1. Connect the battery to the charging controller - positive and negative. If a 12v battery is detected, 1 will be displayed, and if a 24v battery is detected, 2 will be displayed.
.2. Connect the photovoltaic modules to the regulator plus and minus.
3. Connect consumers to charge controllers-less and less.
Item Type: Solar Panel
Color: As picture shown
Solar Panel:
ISC: 3,33
Voc: 20V
Technical Analysis Vpmax: 18 V
Power: 400W
Ipmax: 2.77 A
Output: 5 V / 18 V
Size: Approx. 660 x 280 x 2.5mm/26 x 11 x 0.1in
Waterproof Rate: IP65
Conversion Rate: 19.6-20%
Material: Monocrystalline Silicon Battery
Application: Suitable for Cycling, Climbing, Hiking, Camping, Travel, etc.
Controller:
Model: PWM
Step-down Charging: 28.8 V
Floating Charge: 27.4 V
USB Output: 5 V / 3A
Autoconsumo: <10mA
Discharge Stop: 21.4 V
Maximum Solar Input: <50 V
Current: 10A / 20A / 30A / 40A
Rated Working Current: ≤20A
Uninstall and Reconnect: 25.2 V
Working Temperature: -35 ℃ -60 ℃
Safety Instructions:
2. The battery cable should be as short as possible to minimize losses.
3. The regulator is only applicable to lead-acid batteries: open circuit, AGM, GEL (not applicable to NiMH, Li-ion or other batteries).
4. The charging controller is only suitable for adjusting solar cell modules. Never connect other load sources to the charge controller.
System Connection:
1. Connect the battery to the charging controller - positive and negative. If a 12v battery is detected, 1 will be displayed, and if a 24v battery is detected, 2 will be displayed.
.2. Connect the photovoltaic modules to the regulator plus and minus.
3. Connect consumers to charge controllers-less and less.
Features
1、This solar panels can be used to charge MP3, mobile phones or other devices.
2、You can put the panel under the sun and use it to charge the device directly.
3、Suitable for outdoor cycling, climbing, hiking, camping, travel, etc.
4、Integrated industrial microcontroller, and the PWM load management has 4 stages.
5、One-key configuration, digital display, convenient for using, and with automatic memory function.
6、The controller has dual reverse current protection and low heat generation.
7、The controller has short circuit protection, open circuit protection, reverse protection, and overload protection.
Package List
1 x Solar Panel
1 x Controller
1 x Instructions
1 x Clip
1 x Car Charger
4 x Suction Cup
Package Weight and Dimension
| Weight | 2.49 lb |
| Width | 11.31 Inch |
| Height | 1.17 Inch |
| Length | 27.69 Inch |
