5 in 1 Weather Sensor RS485 Ultrasound Temperature Humidity Wind Speed Direction Air Pressure Micro Weather Environment Meter for Outdoor DC 9 to 30V

Item Type: 5 in 1 Weather Sensor
Material: ABS engineering plastic
Weight: Approx. 1744.00g/61.52oz
Height: Approx. 30cm/11.8in
Base Diameter: Approx. 13.5cm/5.3in
Top Diameter: Approx. 14cm/5.5in
Power: 0.4W (10.5W when heating)
Signal Output: RS485
Working Environment Humidity: 0 to 100%RH
Working Environment Temperature: -40℃ to +60℃
Protecting Level: IP65
Output Method: Aviation Socket
Wind Speed: 0 to 60m/s range, accuracy: ±(0.3+0.03v)m/s (≤30m/s) ±(0.3+0.05v)m/s (≥30m/s), v is the standard wind speed, 0.01m/s resolution, 0.1W power consumption
Wind Direction: 0 to 360 range, ±3° (at wind speed <10m/s) accuracy, 1° resolution
Atmospheric Temperature: -40 to 85°C range, ±0.3°C accuracy, 0.1°C resolution, 1mW power consumption
Atmospheric Humidity: 0 to 100%RH range, ±3%RH accuracy, 0.1%RH resolution, 0.1mW power consumption
Atmospheric Pressure: 300 to 1100hPa range, ≦±0.3hPa accuracy, 0.1 hPa resolution, 0.1mW power consumptionMotherboard base power consumption: 300mW
Wiring Diagram :
485 signal output:
Red: power positive VCC
Green: power negative GND
Black: 485A+
Yellow: 485B-
Note: Make sure the wiring is correct before sending power.
Communicating Protocol:
I. All commands in the manual of weather meter are RTU protocol format commands. All have been configured at the factory, if you need to modify the protocol, refer to the relevant commands or ask for help. Baud rate 9600, 8 data bits, 1 stop bit, no check. 2 frames of data communicating interval of at least 500ms. The default address is 1, and the RTU communicating format is as follows:
Number of address bytes: 1 byte
Number of command bytes: 1 byte
Number of register address bytes: 2 bytes
Number of data bytes: N bytes
Number of CRC check bytes: 2 bytes
II. CRC verification steps:
1. Preset the 16 bit register to hex FFFF, call this register the CRC register
2. Isolate the first 8-bit data with the lower bit of the CRC register, and put the result in the CRC register
3. Check the lowest bit by shifting the contents of the register one bit to the right (toward the lower bit) and filling the highest bit with a 0
4. If the lowest bit is 0: repeat step 3 (shift again) if the lowest bit is 1: the CRC register is iso orthogonal to the polynomial A001 (1010 0000 0000 0001)
5. Repeat steps 3 and 4 until it is shifted right 8 times so that the entire 8 bit data is all processed
6. Repeating steps 2 through 5 for the other 8 bit data
7. The final CRC register obtained is the CRC code (the CRC code obtained is low before high).
Troubleshooting:
The meter displays an incorrect value when RS485 is output. The meter may not be able to acquire data correctly due to wiring problems or communicating serial port failure. Please check whether the wiring is correct and firm, whether the serial port is occupied, and whether the serial port setting is correct.

Features

1、Ultrasound Technology: Compared to traditional mechanical anemometers, the 200KHz ultrasound probe weather environment sensor has no rotating parts, ensuring fast and accurate measurement of meteorological factors in a more precise and stable manner.
2、Special Compensation Technology: Utilizing high efficiency filtering algorithms and special compensation techniques for rainy and foggy weather. The weather sensor operates on the principle of time difference measurement, providing strong resistance to environmental interference.
3、Erosion Resistant Design: The sensor features a erosion resistant probe design with a fully sealed structure and IP65 waterproof rating. It has passed standard salt spray tests, making it ideal for coastal and port environments.
4、Extreme Environment Adaptability: The weather environment meter has undergone rigorous tests for high and low temperatures, waterproofing, salt spray resistance, and sand, dust resistance. It can be equipped with a highly efficient heating device(not included) to ensure reliable operation in frigid conditions, offering broad environmental adaptability.
5、Multi Industry Application: Suitable for monitoring wind speed and other environmental elements in various fields such as agriculture, meteorology, forestry, power generation, environmental protecting, ports, railways, and highways.

Package List

1 x Weather Environment Sensor