Built in NTC Temperature Sensor PLC RTU RS485 Temperature Collector for Industrial Systems

Item Type: Temperature Collector
Voltage: DC 4.5~15V
Current: 4-7MA
Communication Protocol: RTU Protocol, 03, 04 Read Command, 06,16 Write Command.
Serial Port Baud Rate: 9600 ( Default ), No Parity, 8 Data Bits, 1 Stop Bit
Device Address: 0x01 By Default, Up to 247 modules can be used in cascade by modifying the 485 address ( More than 16 please use RS485 repeater).
Function: Can read the temperature value of NTC
NTC Sensor Specifications:
Item Type: NTC Thermistor
Resistance Value: 10K
Resistance Value Accuracy: ±1%.
Resistor B Value: 3950K ±1%
B Value Category: B25/50
Temperature Range: Approx. -20℃-125℃ / -4-257℉

Features

1、Reading NTC Temperature Values: This temperature sensor reads the temperature value of the NTC to provide accurate control and feedback.
2、RS485 Communication Control Acquisition: This temperature sensor supports RTU protocol for control acquisition via RS485 communication.
3、Wide Application: This temperature sensor can be used in the following working systems: PLC control systems, NTC thermistor sensors, thermostatic controllers, industrial systems, touch panels, thermometers, thermal type systems, indoor and outdoor temperature measurement, vegetable garden temperatures, weather forecasting, and monitoring, computer room temperatures, warehouse temperatures.
4、LED Indicator Light: There is an LED indicator on this temperature degree sensor, and the light will flash when it is turned on to start working, and the light is not on at other times.
5、USB Port: The interface of this temperature sensor is USB interface, which is more widely used and easier to connect with other working systems.

Package List

1 x Temperature Collector