Digital 12-24V DC 4-20mA Signal Source Generator Constant Current Source General

Features:
1, easy to use, easy to wire, knob operation, in response to the output immediately after adjustment, no delay
2,
in order to achieve stepless fine adjustment, particularly multi-ring
(5 * 360) potentiometer to adjust the actual fineness of up to 0.01mA,
operate freely
3, power port has a polarity protection, power reverse does not work, do not burn components
5,
12V DC power supply, output load impedance range between 0-350 ohms;
between 0-800 Ohm 24V DC power supply, output load impedance range
6,
the test output is normal, you can use a multimeter (DC current file)
short "4-20mA output" terminal value and the comparison shows that the
multimeter readings are the same
7,
the product can be used: signal sources, regulating valves, control,
test instrumentation, light emitting diode test, the inverter output
analog transmitter
8, the header housing, easy to install, hole size: 76mm * 40mm. The overall size of 80mm * 42mm
Packing include:1 x DC 12V 24V 4-20mA Signal Source Signal Generator Constant Current Source 0.01mA
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Features

1、easy to use, easy to wire, knob operation, in response to the output immediately after adjustment, no delay.
2、in order to achieve stepless fine adjustment, particularly multi-ring (5 * 360) potentiometer to adjust the actual fineness of up to 0.01mA, operate freely.
3、power port has a polarity protection, power reverse does not work, do not burn components.
4、the power supply voltage: 12V DC or 24V (tolerance ± 25%), Total power <1W.
5、12V DC power supply, output load impedance range between 0-350 ohms; between 0-800 Ohm 24V DC power supply, output load impedance range.