Digital Clamp Multimeter AC Volt Amp Meter Tester Intelligent High Accuracy Multi Function Electrical Auto Repair

Item Type: Digital Clamp Multimeter
Material: ABS
AC Current: 2mA-2A-20A-600A, Accuracy: ±1.8%
Resistance: 200-2K-20k-200k-2M-60M(Ω), Accuracy: ±1.0%
Capacitance: 20nF-200nF-20μF-200μF-600mF, Accuracy: ±1.5%
Frequency: 10Hz-100KHz-10MHz, Accuracy: ±1.5%
Temperature: 0-999℃, Accuracy: ±2.5%
Backlight: White LED
Battery: 2 x 1.5V AAA battery
Battery Capacity: 200mAh
Battery: Built in
Jaw Opening Size: Approx. 35mm / 1.38in
How to Use:
1.1 Preparation
1.1.1 When using the meter, users must follow standard safety rules:
‑ Universal electric shock protection
‑ Prevent misuse of the meter
1.1.2 Upon receiving the meter, check for any damage during transport.
1.1.3 After storage and shipping in harsh conditions, check and confirm if the meter is damaged.
1.1.4 The test leads must be in good condition. Before use, check if the insulation of the test leads is damaged and if the metal wire of the leads is exposed.
1.1.5 Using the test leads provided with the meter ensures safety; if necessary, replace with the same or equivalent grade of test leads.
1.2 Operation
1.2.1 When using, use the correct function and range.
1.2.2 Do not exceed the indicated value of the protection range for each range during measurement.
1.2.3 When connecting the meter to the measurement circuit, do not touch the tip of the test leads(metal part).
1.2.6 Before rotating the selector switch to change the measurement function, remove the test leads from the circuit being measured.
1.2.7 Do not measure resistance, capacitance, diodes, and circuit continuity when energized.
1.2.9 Do not measure capacitance until the capacitor is fully discharged.
1.2.10 Do not use this instrument near explosive gases, vapors or dust.
1.2.11 If any abnormality or malfunction of the instrument is noticed, it shall be discontinued.
1.2.12 The meter should not be used unless the meter bottom case and battery cover are fully fastened in place.

Features

1、CONTACTLESS MEASUREMENT: The digital clamp multimeter support NVC sensing and is safer without contact measurement, you don't neeed to worry
2、SENSITIVE CLAMP: The digital clamp meter multimeter is designed with a clamp and can be used to measure cables of various diameters. Highly sensitive inductive clamp, simple measurement, only need to include the wire can be measured
3、EASY TO SWITCH: The digital clamp meter tester features simple switching, possess clear numbers, and with a strong sense of pause between gears
4、SAFE AND SECURE: The AC Volt Amp multimeter uses an prevent burn chip with overload protection, so that you can use with confidence, more rest assured
5、MULTIPLE FUNCTIONS: Clamp multimeter has diode on off alarm, data hold, intelligent prevent burn, low voltage prompt, automatic shutdown, white LED backlight function

Package List

1 x Multimeter
1 x User Manual
1 x Cloth Bag
1 x Red Test Pen
1 x Black Test Pen
1 x Temperature Probe