Oscilloscope Multimeter Handheld Portable Intelligent High Accuracy Color Screen Digital Display Automotive Repair O1X

Item Type: Oscilloscope Multimeter
Model: O1X
Material: ABS, silicone
Display: 2.8in TFT color display
Mode: Multimeter mode, oscilloscope mode
Maximum Displayed Value: 6000 Digits
Automatic Shutdown: Can be set for 10 minutes, 30 minutes, 60 minutes automatic shutdown has not shut down
Power Supply: 1 Lithium ion battery 2500mAh
Oscilloscope Function Parameters:
Bandwidth: 10MHz
Sampling Frequency: 48MSa/s
Input:
Coupling: DC, AC
Input Resistance Pit: 1MΩ
Attenuation: x1, x10
Horizontal:
Sampling Rate Range: 1.5Sa/S-48MSA/s
Sweep Speed Range: 100ns/div-20S/div
Timebase Accuracy: 20ppm
Sampling Depth: 64KB
Vertical:
Sensitivity: 20mV/div-100V/div
Low Frequency Response: Greater than 10Hz
Rise Time: Less than 10ns
Gain Accuracy: ±3%
Measurement: Automatic Measurement: Frequency, period, peak value, maximum value, minimum value, effective value
Trigger:
Trigger Mode: Automatic, normal, single
Trigger Edge: Rising edge, falling edge
Multimeter Function Parameters:
Function: Range
DC Current: 0.001A-10A
AC Current: 0.001A-10A
Resistance: 0.1Ω-60MΩ
Capacitance: 0.01nF-99.99mF
Flexible Current Clamp Current: 600.0A(60mV signal), 6000.0A (600mV signal)
Diode: 0-3V(light up LED beads)
On Off: Measured Resistance: Less than 50Ω, buzzer sounds
Screenshot Function: Yes
Data Saving: Yes
Flashlight Lighting: Yes

Features

1、ARBITRARY WAVEFORM MEASUREMENT: Oscilloscope multimeter is suitable for any signal waveform, such as sine wave, square wave pulse wave, sawtooth wave, arbitrary wave, noise, DC, square wave, etc.
2、OUTPUT SIGNAL: The signal output port output a fixed square wave signal with a parameter of 3V 1KHz. Pay attention to positive and negative polarity when measuring, and avoid contact with metal parts of the well
3、TEST FUNCTION: Multimeter can be used for AC voltage test, DC voltage test, AC current test, DC current test, on off buzzer test, resistance test, diode test, capacitance test
4、SAVE FUNCTION: Hold down the save key of oscilloscope multimeter for 2 seconds, the current screen content will be saved to the device as a picture. To view the saved pictures, you need to connect your device to your computer via USB and view them in your computer
5、APPLICABLE SCENARIO: Digital oscilloscope multimeter is the ideal multifunctional meter for professionals, factories, schools, hobbyists or families

Package List

1 x Multimeter
2 x Probes
1 x Charging Cable
1 x User Manual
1 x Storage Bag