RC 550 3Solt 20T Brushed Motor Carbon Brush Changeable for 1/10 1/12 RC OffRoad Vehicle

Item Type: RC Brush Motor
Material: Carbon steel + copper
Colour: Black
No-load Speed: 16000 ± 12%RPM
No-load Current: <1.7A
Motor Shaft: Approx. 3.175mm/0.125in
Blocking Current: 10.9-62.1A
Torsion: ≥2537.6g.cm
Shaft Length: Approx. 12mm/0.47in
Diameter: Approximately. 35.9mm/1.41in
Length: Approx. 48.6mm/1.91in
Connection: CCW
Compatible: Suitable for 1/10 1/12 RC off-road vehicles.
Installation and Maintenance:
1. If you want to replace the motor mounting screws, please use the same type and size as when your vehicle was initially installed.
2. Do not over tighten the motor mounting screws. Doing so may strip the threads of the mounting holes.
3. Connect the + and motor wires to the corresponding wires on the electronic speed controller (ESC).
4. To clean the motor, please gently wipe off the dirt regularly, especially pay special attention to the area around the ball bearing. Do not spray cleaners or solvents into the motor.
5. Check the brushes regularly to make sure they move freely inside the hood.
6. When the brush is worn or there are signs of color change, please replace the brush.

Features

1、Direct welding wiring guide, providing flexible welding options. For 1/10 1/12 RC Off‑Road Vehicle.
2、High-purity copper windings can maximize efficiency and accuracy designed for maximum energy conversion.
3、The precisely balanced rotor, with high smoothness, can achieve the best reliability and maximum speed.
4、Double ball bearings, balanced speed, low noise, movable/replaceable structure, easy to clean and maintain.
5、High-strength magnets provide unparalleled brush motor performance, excellent torque and long life.

Package List

1 x RC 550 Brush Motor

2 x Silicone Connecting Wire

1 x Manual