Product Overview
Material: ABS, monocrystalline silicon
Video
Master Control Sensor:
1080P: Master and lngenic T31ZL and 2063
1440P: Master and llngenic T31ZX and 4653
Video Resolution:
Master Stream Coding: 1920x1080 at 15fps
Substream Coding: 640 x 360 at 15fps
Video Recording:
Compression Format: H.265
Video Format: MP4
Lens: 4mm F2.0 low light, wide angle 120 degrees, 4x digital zoom
Night Vision: 6pcs and array IR LED, night vision distance 30m. Full color day or night
Audio
Audio Compression: G.726, AAC
Audio Coding Rate: 8Kbps, 16bit
Audio Input or Output: Built in MIC and speaker, support two way intercom
Alarm
PIR Motion Detection: Support up to 12 meters PIR detection range
Alarm Linkage: Alarm video to Micro storage card, alarm cell phone message push
Video Storage
Memory Card (Not Included): Maximum support up to 128G micro storage card. Support clouding storage (open experience 30 days, subsequent renewal required)
Recording Mode: PIR alarm recording
Video Playback: Support App remote play and download video
Power Supply
Solar Panel: 6W monocrystalline silicon solar panel
Battery: Built in 3 x 3.7V 18650 batteries, total capacity up to 9600mAh (built in)
Working Mode: Low power working mode
Wake Up Mode: PIR motion detection wake up, remote APP wake up
Hibernation Status: When alarm is over or remote connection is disconnected
Power Consumption:
Hibernation Standby Power: 0.03W
Operating: 1.3W at daytime, 3W at night vision
PTZ
Rotation Angle:
Horizontal Pan: 0°-360°
Vertical Tilt: 0°-120°
Rotation Speed:
Horizontal Speed: 10°-30°/S
Vertical Speed: 8°-25°/S
Power Input: DC5V 2A
Use Environment:
Environment -20℃-+60℃(-4℉-+140℉)
Humidity: 10%-80%
Housing Material: ABS fireproof plastic material, breaking proof, waterproof IP65
Power Cable: Type C connector, three meters extension cable
1. About the battery, power supply, and standby
1.1. The camera is battery powered, and the battery life will be affected by the camera start up time and the number of start ups, so please set the usage environment correctly.
In places with heavy traffic, set the PIR sensor to off or low.
In moderately trafficked areas, set the PIR Sensor to medium.
In low traffic areas, set the PIR sensor to high.
Or set the time to automatically activate or deactivate the PIR sensor.
1.2. The camera will turn off automatically when the battery is low, so please charge it promptly when the camera does not have any indicator. To prevent the battery from over discharging and failing to start up.
1.3. When using solar power to power the camera, the normal operating voltage of the camera is 3.7V‑4.5V. Please fully charge the solar battery before first use.
When the battery voltage is higher than 3.7V, the camera can work normally.
When the battery voltage is lower than 3.7V, all lights of the camera will go out. Please charge the solar power in time.
1.4. When using the camera for the first time or re powering the camera, if the video screen prompts charging, it is because the camera is not reading the battery level.
Wait for a moment, rebooting, and the battery information is OK.
II. About the net environment
2.1. Please use a 2.4G WiFi router to connect to the camera wirelessly if you order the WIFI version. Currently, 5G router is not supported.
2.2. Please do not use the WiFi signal connection of the modem configured by the telecom operator.
2.3. Please install the camera within 10 meters from the router (if not, we recommend you to purchase an extension to boost WIFl).
2.4. When watching video remotely on your phone, please make sure your phone net status is good. If the phone net status is bad or stuck, please restart the phone or reopen the APP to watch.
2.5. When the camera is in net distribution mode for a long time, the blue light will keep flashing. In order to save power, the camera will turn off automatically after 5 minutes. If you need to turn it on again, please restart it.
2.6. When the camera is connected to the router successfully, the blue light will be on for a long time after the camera starts up, the mobile app can receive the push message but cannot watch the live video, please restart the app or install the camera in the nearby router.
2.7. Please tighten the WIFI antenna, otherwise it may cause the net distribution is not available or the video is not smooth.
3. About PIR sensor
3.1. Please do not install the camera near air conditioners, microwave ovens, strong air currents and strong electromagnetic fields to prevent air currents and magnetic fields from causing false triggering. If installed in these environments, please turn off the PIR sensor for best results.
3.2. The camera uses a dual algorithm that detects human body sensing and screen changes to determine whether there are people in the surveillance area, so please avoid objects with periodic changes in the screen when installing the camera, such as leaves, wind blown flags, and other objects that are constantly moving.
3.3. When installing and fixing the camera, please fix it firmly. Avoid false alarms caused by wind.
3.4. When mounting the camera, do not point the lens directly at the sun. Sunlight contains a large amount of infrared rays, which will reduce the recognition rate of human body sensing.
3.5. When the ambient temperature is 36.5-37℃, the sensitivity of PIR sensor will be slightly reduced and its distance will be slightly reduced, which is normal.
3.6. The camera has a filter effect for pets under 30kg. For example, the camera will not be triggered when the family cat or puppy passes by the camera monitoring area.
3.7. Please refer to the manual to adjust the installation angle and height to make the PIR sensor achieve the great effect.
Features
1、Monocrystalline Solar Panel Powered and IP65 Waterproof: The solar surveillance camera is equipped with 25% high conversion rate monocrystalline solar panel with built in 9000mAh rechargeable battery, which can be charged when placed under direct sunlight. Solar camera has IP65 waterproof rating, safe and stable.
2、Auto Power On: When the surveillance camera is off, the solar panel will automatically power on and connect after charging to a certain power level. No need to manually recharge and restart. Security camera can 355° pan rotation, 90° tilt rotation, and has 120° ultra wide viewing angle.
3、3MP and Resolution: Solar surveillance camera has 1920x1080 high resolution, 3MP, with 4 bright spotlights and 2 built in array IR LEDs, good transmission signal through the wall and strong anti interference ability.
4、Color Night Vision and Anti Intrusion: Solar powered surveillance camera provides clear color night vision, night vision monitoring distance up to 30m (98ft), sends you timely alerts after detecting intruders and the strobe light, integrated spot light and built in siren will be activated.
5、PIR Detection and Two Way Audio: The solar powered surveillance camera will automatically activate when it detects a moving object with heat through PIR, send an alarm alert to the mobile app, start recording to the storage card at the same time, and automatically save a video recording every time it is activated.
6、Built in Speaker and Microphone: This outdoor surveillance camera has a built in speaker and microphone, so you can talk to the delivery person, neighbors, and family members outside your door remotely.
7、Secure Storage: The solar camera supports 8 to 128GB microstorage cards (not included) and 30 day free trial clouding storage. All videos from the security camera are encrypted and cannot be accessed by anyone without your permission.
Package List
1 x Camera
1 x Solar Panel
2 x Mounting Bracket
2 x Screwdriver
2 x Fixed Cord
2 x Antenna
23 x Screws
6 x Nuts
8 x Expansion Screw
2 x Connection Cable
1 x Instruction Book
1 x Sticker
Package Weight and Dimension
| Weight | 3.74 lb |
| Width | 8.58 Inch |
| Height | 5.46 Inch |
| Length | 11.31 Inch |
