SURPASSHOBBY 4068 RC Brushless Motor 2050KV+120A Waterproof ESC XT60 Connector for 1/8 RC Car

Rating *

Name

Email *

Review Subject *

Comments *

$143.17

Shipping: Free Shipping

Product Overview

Item Type: RC Brushless Motor
Material: Plastic+Metal+Electronic Component
Color: Red and Black
Brand: SUPERAR HOBBY
4068 Motor:
KV (rpm/volt): 2050kv
Wattage: 2200
Maximum Speed: 50000
Maximum Ampere: 105A
Number Of Rotor Poles: 4
Diameter: Approximately. 40mm/1.6in
Length: Approx. 68mm/2.7in
Shank Diameter: Approx. 5.0mm/0.2in
Shaft Length: Approx. 18mm/0.7in
Connector: Approx. 4.0mm/0.16in
120A ESC:
Continuous Current: 120A
Maximum Current: 600A
Motor Type: Sensorless and brushless motor
For 4S Lipo or 12 batteries NIMH
1. For Highway: 40xx or smaller motors with KV <3000
2. For RC Off-Road/Truck: Motor with a size of 40xx or smaller when KV <2500
For 6S Lipo or 18 battery NIMH
1. For Highway: 40xx or smaller motors with KV <2500
2. For RC Off-road/Truck: 40xx or smaller motor with KV <2000
Resistance: 0.00035ohm
Battery: 3-6 cells Lipo / 9-18 cells NIMH
Bec Output: 6.1V/3A (switch mode)
Product Size: Approx. 60x45x45mm/2.4x1.8x1.8in
Application: Suitable for 1/8 RC cars.
How to Use:
1. Connect the BEC cable to the receiver.
2. Use ESC to connect the motor cable.
3. Turn on the transmitter.
4. Connect the battery pack to the ESC, and then turn on the ESC.
5. After the connection between the motor and the battery is completed, the motor emits a "beep beep-beep beep beep".
6. When the throttle stick is in the neutral position, the electric motor will beep again
7. ESC is feasible.
Troubleshooting:
1. If the motor fails to work and no sound is emitted after power-on, please check the connection between the battery pack and the motor.
5. If the RC car suddenly stops under working conditions, please check the connection of the motor and roadblocks.
6. If the RC car is driving in the opposite direction (transmitter can be used), please swap the two wires between the ESC and the motor.

Features

1、It adopts 4‑level 12‑slot high‑torque motor design, which can realize maximum power conversion. CNC machined steel billet, 6061‑T6 aluminum heat sink, secondary oxidation treatment, high‑end and fine appearance. Suitable for 1/8 brushless RC cars.
2、High‑speed ABEC5 ultra‑durable sealed bearings, low friction, low noise, high accuracy, and long‑lasting use. 4.0mm gold‑plated connector, 5.0mm output shaft.
3、High balance explosion‑proof rotor, high smoothness, high speed, dynamic balance control within 10mg, it can be disassembled and replaced later. Ultra‑thin silicon steel sheet, excellent performance, high magnetic permeability, high silicon content, good insulation and heat resistance.
4、It adopts M3+M4 screws, a variety of installation styles for you. Powerful current resistance, excellent heat dissipation, easy to program and compatible with pocket programming cards.
5、The motor adopts precise waterproof design, maximum power conversion, high‑purity copper coil, maximum efficiency, temperature resistance 180‑200℃. Multiple protection functions, battery low‑voltage cut‑off protection, overheating signal loss protection, motor stall protection.