Signal Generator DDS DC 5V 20MHz Dual Channel Arbitray Waveform Frequency Counter US Plug 100‑240V

$110.72

Shipping: 3.99$ per item

Adding to cart… The item has been added

Product Overview

Item Type: Signal Generator
Product model: MHS5200A
Sine Wave Frequency Range: 0~20MHz
Working Environment Temperature: -10℃ ~ 50℃, humidity <80
Square Wave Frequency Range: 0~6MHZ
Pulse Wave Frequency Range: 0~6MHZ
Triangular Wave Frequency Range: 0~6MHZ
TTL COMS Digital Signal Frequency Range: 0~6MHZ
Any Wave and Other Waveforms Frequency Range: 0~6MHZ
Counting Range: 0~4294967295
Calculation Method: Manual
Minimum Frequency Resolution: 10mHz
Frequency Error: 1 ± 5 x 106
Frequency stability: ± 1 x 105/5 hours
Any Wave and Other Waveforms: 50 Ω ± 10%
Amplitude Range and Peak Value: 5mVp-p~20Vp-p
Amplitude Resolution: 1mVp-p, - 20dB attenuation. 10mVp-p, no attenuation.
Amplitude Stability: ± 0.5%, every 5 hours.
Amplitude Error: ± 1%+10mV, frequency 1KHz, 15Vp-p.
Offset Range: - 120%~+120%
Offset Resolution: 1%
Relative Range: 0~359 °
Phase Resolution: 1 °
Waveform Type: Sine wave, square wave, pulse wave, adjustable duty cycle, precise adjustable pulse width and cycle time. Triangular wave, bias sine wave, CMOS wave, DC level, and set the DC amplitude by adjusting the bias. Half wave, full wave, positive ladder wave, anti ladder wave, noise wave, exponential rise, exponential fall, multi sound wave, Cinke pulse, Lorentz pulse, and 60 user defined waveforms.
Waveform Length: 2048 Points
Sampling Rate: 200MSA/s
Waveform Amplitude Resolution: 12bits
TTL Signal:
Output Level: ≥ 3Vpp
Fan out Coefficient: ≥ 20TTL
Lifting Edge Time: ≤ 20ns
Sine Wave:
Harmonic Suppression System: ≥ 40dBc at <1MHz, 35dBc at 1MHz~25MHz.
Total Harmonic Distortion: <0.8% at 20Hz~20kHz.
Square Wave:
Lifting Edge Time: ≤ 20ns
Overshoot: ≤ 10%
CMOS Signal:
Duty Ratio Regulating Range: 0.1%~99.9%
Low level:<0.3V
High level: 1V~10V
Lifting Edge Time: ≤ 20ns
Sawtooth Wave:
When the duty cycle is more than 50%, the sawtooth wave rises.
The duty cycle is less than 50%, and the sawtooth wave is reduced.
Arbitrary Wave:
Quantity: 16 Sets
Storage Depth and Group: 1KB, 16 groups
Waveform Output and Frequency Measurement Range:
GATE-TIME=10S, 0.1HZ-60MHZ.
GATE-TIME=1S, 1HZ-60MHZ.
GATE-TIME=0.1S, 10HZ-60MHZ.
GATE-TIME=0.01S, 100HZ-60MHZ.
Positive and Negative Pulse Width Measurement: 10ns resolution, maximum measurable 10s.
Period Measurement: 20ns resolution, maximum 20s.
Duty Cycle Measurement: 0.1% resolution, measurement range 0.1%~99.9%. 

Features

1、Arbitray Waveform: The programmable dual channel singal generator can generate various waveforms, including square wave, sine waves, triangular waves and so on, and each channel can set the duty cycle and other parameters independently.
2、Great Performance: Adopting large scale FPGA integrated circuits, high speed MCU microprocessors and active crystal oscillators, and all signal output terminals can work for 60s under load short circuit.
3、The Stable Output: Comes with dual channel DDS signal and TTL electrical level output to produce accurate, stable and low distortion output signal.
4、Simpler Operation: The display screen is clear, with eye protection design, which is not easy to fatigue after long use. Intuitive control panel, easy to control. It has linear scanning and logarithmic frequency scanning functions. It has the functions of frequency measurement, period measurement, positive and negative pulse width measurement and counting.
5、Wider Application: The signal generator is an ideal instrument for electronic engineering, laboratory, production line, teaching and scientific research.

Package List

1 x MHS-5200A Signal Generator

1 x USB Cable

1 x DC 5V Power Adapter

2 x Q9 Cable with Clamp

1 x TTL Expansion Board

1 x Disc (with User Manual Inside)

Package Weight and Dimension

Weight2.17 lb
Width8.19 Inch
Height3.9 Inch
Length10.14 Inch