Signal Generator Frequency Counter DC5V DDS Dual Channel Programmable Function Signal Generator Counter 100‑240V EU Plug

Item Type: Signal Generator Frequency Counter
Material: ABS
Model: MHS5206A
Parameter:
Sine Wave Frequency Range: 0-6MHz
Working Environment Temperature: -10℃ to 50℃, humidity <80
Square Wave Frequency Range: 0-6MHZ
Pulse Wave Frequency Range: 0-6MHZ
Triangular Wave Frequency Range: 0-6MHZ
TTL COMS Digital Signal Frequency Range: 0-6MHZ
Any Wave and Other Waveforms Frequency Range: 0-6MHZ
Counting Range: 0-4294967295
Calculation Method: Manual
Source Selection:
Frequency:
Minimum Frequency Resolution: 10mHz
Frequency Error: ±5 x 106
Frequency Stability: ±1 x 105/5 hours
Any Wave and Other Waveform: 50Ω±10%
Amplitude Characteristic:
Amplitude Range (Peak to Peak): 5mVpp to 20Vpp
Amplitude Resolution: 1mVpp (-20dB attenuation), 10mVpp (no attenuation)
Amplitude Stability: ±0.5% (every 5 hours)
Amplitude Error: ±1%+10mV (frequency 1KHz, 15Vpp)
Offset Range: -120% to +120%
Offset Resolution: 1%
Relative Range: 0 to 359°
Phase Resolution: 1°
Wave Characteristics:
Waveform Type: Sine wave, square wave, pulse wave (adjustable duty cycle, precise adjustable pulse width and cycle time), triangular wave, partial sine wave, CMOS wave, DC level (set DC amplitude by adjusting bias), half wave, full wave, positive step wave, inverse step wave, noise wave, exponential rise, exponential fall, multiple sound wave, Cinke pulse, Lorentz pulse, and 60 user defined waveforms
Waveform Length: 2048 points
Sampling Rate: 200MSA/s
Waveform Amplitude Resolution: 12bits
TTL Signal:
Output Level: ≥3Vpp
Fan Out Coefficient: ≥20TTL
Lifting Edge Time: ≤20ns
Sine Wave:
Harmonic Suppression System: ≥40dBc (<1MHz), 35dBc (1MHz-25MHz)
Total Harmonic Distortion: <0.8% (20Hz-20kHz)
Square Wave:
Lifting Edge Time: ≤20ns
Overshoot: ≤10%
CMOS Signal:
Duty Ratio Regulating Range: 0.1% to 99.9%
Low Level: <0.3V
High Level: 1-10V
Lifting Edge Time: ≤20ns
Sawtooth Wave:
Duty Cycle: >50% lift sawtooth wave
Duty Cycle: <50% reduce sawtooth wave
Arbitrary Wave:
Quantity: 16 sets
Storage Depth and Group: 1KB, 16 groups
Frequency Measurement Range of Waveform Output:
GATE-TIME=10S: 0.1HZ-60MHZ
GATE-TIME=1S: 1HZ-60MHZ
GATE-TIME=0.1S: 10HZ-60MHZ
GATE-TIME=0.01S: 100HZ-60MHZ
Positive and Negative Pulse Width Measurement: 10ns resolution, maximum measurable 10s
Period Measurement: 20ns resolution, maximum 20s
Duty Cycle Measurement: 0.1% resolution, measurement range 0.1%-99.9%

Features

1、EXCELLENT PERFORMANCE: Programmable function arbitrary wave generator has high accuracy, excellent performance and output short circuit protection capability, all signal output terminals can work for 60S under load short circuit.
2、EASY TO USE: Clear display screen and yellow green eye protection design, the eye is not easy to fatigue after long time use, intuitive control panel is easy to control.
3、HIGH STABILITY: Arbitrary waveform generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor, internal circuit uses an active crystal oscillator as the reference, the signal stability is greatly enhanced.
4、DUAL CHANNEL: Signal generator adopts dual channel DDS signal and TTL electrical level output to produce accurate, stable and low distortion output signal. Each channel can set parameters and adjust duty cycle independently.
5、MULTI FUNCTION: The signal generator counter has linear and logarithmic frequency scanning functions, frequency measurement, cycle measurement, positive and negative pulse width measurement and counting functions.

Package List

1 x Signal Generator Frequency Counter

1 x USB Data Cable

1 x DC5V Power Adapter

2 x Q9 Clip Cable

1 x TTL Expansion Board

1 x Light Disc (Include English Manual)