DDS Signal Generator Counter Arbitray Waveform Function Frequency Meter 2 Channel DC5V MHS5225A 25MHZ

Item Type: DDS Signal Generator Counter
Product Model: MHS5225A
Parameter: Sine Wave Frequency Range: 0 to 25MHz
Working Environment Temperature: -10℃~50℃
Humidity: <80
Square Wave Frequency Range: 0~6MHZ
Pulse Wave Frequency Range: 0~6MHZ
Triangular Wave Frequency Range: 0~6MHZ
TTL or COMS Digital Signal Frequency Range: 0 to 6MHZ
Random Wave or Other Waveform Frequency Range: 0~6MHZ
Count Range: 0 to 4294967295
Calculation Mode: Manual
Frequency:
Minimum Frequency Resolution: 10mHz
Frequency Error: +/- 5 x 106
Frequency Stability: ±1 x 105/5 hours
Arbitrary Wave or Other Waveform: 50Ω±10%
Amplitude Characteristics:
Amplitude Range(peak to peak value): 5MVp-p ~ 20vp-p
Amplitude Resolution: 1mVp-p (-20dB attenuation) 10mVp-p (no attenuation)
Amplitude Stability: 0.5% (every 5 hours)
Amplitude Error: ±1%+10mV (frequency 1KHz, 15Vp-p)
Offset Range: -120% to +120%
Offset Resolution: 1%
Relative Range: 0 to 359°
Phase Resolution: 1°
Wave Property:
Type of Waveform: (sine wave, square wave, pulse wave (duty ratio adjustable, pulse width and cycle time accurately adjustable), triangular wave, partial sine wave, CMOS wave, DC level (set DC amplitude by adjusting bias), half wave, full wave, positive step wave, inverse step wave, noise wave, exponential rise, exponential fall, multisonic wave, Zinke pulse, Lorentz pulse, and 60 user defined waveforms)
Waveform Length: 2048 Points
Sampling Rate: 200MSa/s
Waveform Amplitude Resolution: 12bits
TTL Signal:
Output Level: ≥3Vpp
Fan Out Coefficient: ≥20TTL
Lifting Edge Time: ≤20ns
Sine Wave:
Harmonic suppression ≥40dBc (<1MHz), 35dBc (1MHz to 25MHz)
Total Harmonic Distortion: <0.8% (20Hz~20kHz)
Square Wave:
Lifting Edge Time: ≤20ns
Overshoot: ≤10%
CMOS Signal:
Duty Cycle Adjustment Range: 0.1%~99.9%
Low Level: <0.3V
High Level: 1V to 10V
Lifting Edge Time: ≤20ns
Sawtooth Wave:
Duty Cycle >50%: Rising sawtooth wave
Duty Cycle <50%: Decreasing desawtooth wave
Arbitrary Wave:
Quantity: 16 Groups
Storage Depth Per Group: 1KB per 16 groups
Waveform Output Frequency Measurement Range:
GATE-TIME=10S 0.1HZ-60MHZ
GATE-TIME=1S 1HZ-60MHZ
GATE-TIME=0.1S 10Hz-60MHZ
GATE-TIME=0.01S 100Hz-60MHZ
Positive and Negative Pulse Width Measurement: 10ns Resolution, the maximum measurement of 10s
Periodic Measurement: 20ns Resolution, maximum measurement 20s
Duty Ratio Measurement: 0.1% Resolution, measuring range of 0.1%~99.9%

Features

1、ACCURATE WITH GUARD: Programmable function arbitrary wave generator dual channel signal, has high accuracy, superior performance, multi effect sturdy, and has the output short circuit guard ability, all signal output, can work in load short circuit condition 60S
2、APPLICABLE SCENARIO: You will have 1 LCD1602 display screen, bring clear display, yellow green eye caring design, not easy to fatigue in long time use. Intuitive control panel for easy control. The signal generator is an ideal instrument for electronic engineering, laboratory, production line, teaching and scientific research, and is an important tool for experts and novices
3、STABLE AND HIGH SPEED: Dual channel DDS arbitrary waveform generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit uses an active crystal oscillator as a reference. So the signal stability is greatly enhanced
4、ADJUSTABLE PARAMETERS: Dual channel DDS signal and TTL electrical level output, to produce accurate, stable, low distortion output signal. Including sine wave, square wave, triangular wave, sawtooth wave, pulse wave, white noise, user defined waveform. Each channel can set parameters independently. The duty cycle of each channel can be adjusted individually, the accuracy can be 0.1%
5、COMPLETE FUNCTIONS: Function generator has linear scanning and logarithmic frequency scanning functions, frequency measurement, period measurement, positive and negative pulse width measurement and counting functions

Package List